Interfacing LCD 16×2 Display with Arduino Introduction In many Arduino projects, we use the Serial Monitor to debug code or display data. It’s very handy during the prototyping phase, but in the final phase of your project, and to keep the result clean, without a PC or USB cable attached, you need a small display […]
Interfacing LCD 16×2 Display with Arduino Read More »
Interfacing LM35 Temperature Sensor with Arduino Introduction Temperature is one of the most commonly measured physical quantities in electronics projects, from simple home automation systems to industrial monitoring equipment. Among the many sensors available for this purpose, the LM35 stands out as one of the most popular choices. With a typical accuracy of ±0.5°C, low
ref Interfacing LM35 Temperature Sensor with Arduino ref Read More »
Interfacing LM35 Temperature Sensor with Arduino Introduction Temperature is one of the most commonly measured physical quantities in electronics projects, from simple home automation systems to industrial monitoring equipment. Among the many sensors available for this purpose, the LM35 stands out as one of the most popular choices. With a typical accuracy of ±0.5°C, low
Interfacing LM35 Temperature Sensor with Arduino Read More »
PrpU waste sorting i veX imporaSDor keeping our neighbourhoods clean and saving resourceWs for the future. When we mix food scraps, plastic, paper, and batteries in the same bin, recycling becSomes hard, landfills fill up quickly, and harmful chemicals leak into the soil and water. Over time, this creates bigger problems like higher cleanup costs
Stepper Motor Interfacing with Arduino UNO Stepper motor is a brushless DC motor that divides the full rotation angle of 360° into a number of equal steps. The motor is rotated by applying a certain sequence of control signals. The speed of rotation can be changed by changing the rate at which the control signals are applied.
Stepper Motor Interfacing with Arduino UNO Read More »
